Fixed the problem where the CAS latency can not be set manually when the
CPU:DRAM is set to PSB8000/5:4 or PSB800/3:2.
Fixed the problem where the system fails the diagnostic test of Intel 865G
Graphics Controller Diagnostic Utility.
Fixed the problem where the system will hang at starting PXE if the OnChip
SATA is set to enhanced mode and the LAN boot is enabled.
Added the message of how to enter BIOS setup in the full screen logo.
Changed the option wordings of "Boot Device" from "ZIP100"
to "ZIP100/250" and from "USB-ZIP" to "USB-ZIP/LS120".
Revised the wording of memory status from "DDR at Bank" to "DDR
at DIMM" in system configuration table.
Fixed the problem where the system will reboot when the "Resume by Alarm"
is enabled and user pressed the power button to shutdown the system during
POST.
Fixed the problem where the HDD size was detected as 136GB when 200/250/300
GB SATA drives are connected to SATA1 or SATA2 (ICH5 SATA channels).
abit Taiwan Home
