Taipei, Taiwan, R.O.C., March 18th, 2003-
Based on the NVIDIA® nForce™2 SPP chipset, supporting the latest AMD Athlon XP
CPUs with a 333MHz front-side bus, and featuring new dual 400MHz DDR memory
controllers, and integrated GeForce4 MX Graphics delivering a new level
of graphic performance and flexibility to your PC, ABIT's NF7-M series gives
multimedia perfection and the maximum edge.
The NF7-M is fully loaded
FSB 200/266/333; Dual DDR 200/266/333/400
AGP 8X; Soundstorm™ Technology; Integrated GeForce 4 MX Graphics; ABIT
Engineered Features.
At the core of the NF7-M is the NVIDIA nForce2 SPP chipset with MCP-2T, which
provides cutting-edge technologies for unparalleled multimedia performance. Dual
400MHz memory controllers deliver up to a 50% increase in memory bandwidth, and
optimized 128-bit architecture means reduced memory latency. Three DDR DIMMs
allow support for up to 3GB of 333MHz or 2GB of 400MHz DDR memory, and advanced
memory architecture provides the power to drive the latest 3D games and
multimedia applications with unequalled smoothness and realism.
ABIT Engineered for Performance, Stability and the Maximum
Edge
ABIT Maximum Edge Features; Integrated GeForce 4 MX Graphics,
Overclocker's Front Side Bus; 5 Bit Frequency ID (FID); Guaranteed Voltage
Settings; 3 Phase Power solution; ABIT CPU H.T.P
Only ABIT allows for the Front Side Bus to be adjusted up to 237 MHz-at least 17
MHz higher than the closest competition. This overclocker friendly FSB is made
possible through ABIT's use of a 5 bit Frequency ID (FID); other motherboards
use a 4 bit FID. While others may offer higher voltage adjustments, only ABIT
guarantees that all of our settings will work. Our ABIT Engineers are
overclockers too, and have tested all the settings. The reason for this
guaranteed overclockabity? ABIT's 3 phase power solution is back. This ABIT
Engineered solution ensures more power to the CPU (up to 75-80 W v. 60 W with a
2 phase solution) while overclocking, providing rock-solid system stability.
This means fewer crashes for ABIT users and higher overclocks. Finally, with
ABIT's CPU H.T.P (CPU Hardware Thermal Protection) Technology for nForce 2
series motherboards, CPU burn-out through cooling malfunction is averted,
ensuring your high performance ABIT motherboard won't crash and burn.
An Unreal Platform
With the SPP+MCP2's Audio Processing Unit (APU) and professional S/PDIF Out,
the NF7-M delivers rich 6-channel, Dolby Digital 5.1 audio. Video performance is
blown wide open with AGP 8X support, and high-speed peripherals are enabled by
the NF7-M with USB 2.0 functionality. On-board 10/100 LAN means that the NF7-M
is ready for high-speed Internet, and 5 PCI slots provides nearly unlimited
system flexibility. To top it all off, ABIT's exclusive SoftMenu™ allows users
ultimate control over vital system parameters, including CPU frequency, Vcore
voltages, and memory timings.
Optimal BIOS settings
With the NVIDIA nForce2 chipset, optimized dual memory controllers, AGP8X,
advanced high-speed I/O capabilities and ABIT Engineering, the new BIOS will
allow Front Side Bus to be adjusted up to 250mhz that's almost 37Mhz higher than
the closest competition. The NF7-M powers through your multimedia applications
with power to spare, giving you the maximum edge.
 The
BH7 the board made by Overclockers for Overclockers
The BH7 is a next generation motherboard for Intel CPUs with Hyper-Threading
Technology. The BH7 uses Intel's 845PE chipset to bring the latest in technology
to ABIT's Intel platform. Only ABIT provides Intel users with 6-channel sound
and S/PDIF IN/OUT as a standard feature for improved audio performance. With
full support for USB 2.0, AGP4X and onboard LAN, the BH7 gives users an easy way
to connect to today's hottest peripherals. ABIT offers users the MaxIImum Edge
by also incorporating Serial ATA150 onboard. ABIT succeeds in creating an Intel
PE-based motherboard with full features to ensure longevity and flexibility.
Plus, the BH7 is capable of supporting future 800Mhz FSB processors (UNOFFICIAL
support only). The BH7 is a low cost, but with unmatched overclocking ability
and support future Intel 800Mhz FSB processors.
Just check out these specs:
Enhanced 533MHz FSB: The 533MHz FSB increases bandwidth and improves
overall system performance. DDR 333 Support: Supports up to 2GB of PC2700
and peak bandwidth of 2.7GB/s. 10/100 LAN on board: Lets you easily
connect to the web without having to buy an advanced 10/100 Ethernet card.
Serial ATA 150MB/s data transfer rate: Serial ATA is an evolutionary
replacement for the Parallel ATA storage interface. This new high-speed
interface boosts data transfer rates to up to 150 MB/sec. More flexible power
tolerances allow for smaller and more efficient cables. 6-Channel Audio and
S/PDIF Out interface: Lets you enjoy 6-channel audio without having to buy
advanced sound cards. USB 2.0 Supports 480MB/s data transfer rate:
Supports speeds up to 480 Mb/sec, approximately forty times faster than
conventional USB 1.1 ABIT SoftMenu™ Overclocking: The overclocking functions
include CPU frequency, Vcore, multiplier and memory voltage adjustment to
maximize your system performance.
The BH7 is ready for the future:
-
Future 800Mhz FSB processor support
-
Future Serial ATA hard drive support
-
Future Add on peripherals support
Siluro FX5800 DOTH
NVIDIA GeForce FX GPU, Digital Vibrance control 3.0, 128MB DDR II Memory Video
Mixing Renderer, OTES Technology, Video-in/out,DVI, CineFX Engine, AGP 8X,
Intellisample Technology
 The
Siluro FX5800 DOTH 3D Graphics Accelerator Card features the patented ABIT OTES
and takes graphics experiences to a whole new level. It not only delivers
unprecedented 3D graphics performance, the revolutionary new NVIDIA CineFX™
engine also introduces cinematic-quality special effects and studio-quality
color to the PC for the first time.
Using the new advanced 128MB 2ns Super-fast DDR II Video Memory System, 2 6mm
diameter heat-pipes with side airflow effect, FAN LED, a copper heat-sink on the
memory for utilizing wide surface of conductive base to help absorb thermal
energy from the GPU, the OTES III helps prolong product's life and delivers the
best performance.
Hardware Specifications:
CineFX Shading Architecture, Support for DX 9.0 Pixel Shader 2.0+, Z-correct
bump-mapping, High-Precision 3D Rendering Engine, 8 texels per clock rendering
engine, Microsoft DirectX® and S3TC® texture compression, 128bits,
studio-quality floating point precision through the entire graphics pipeline.
Intellisample Technology, Blistering-fast antialiasing performance, Advanced
loss-less compression algorithms for both color and Z data, Advanced Display
Pipeline With Full NView Capabilities, Dual, 400MHz RAMDACs for display
resolutions up to and including 2048 x 1536@ 85Hz, Video Mixing Renderer (VMR)
supports multiple video windows with full quality and features in each window.
High-quality HDTV/DVD playback, Digital Vibrance Control (DVC) 3.0, DVC color
and image sharpening control.
I/O Connections:
OTES Thermal Exhaust Port, DVI-I, D-Sub 15 Pin VGA Out, 9 Pin Video-in/out
Connector
Compatibility
API support, Complete DirectX Support including DirectX 9.0 and lower, Full
OpenGL 1.4 and Lower Support, Support operation system under Windows®XP/2000/ME/98,
Linux and Mac® OS
Package Contents
Accelerator Card, CD Driver & SiluroDVD 4 Software, Adapter for S-Video &
RCA Video In/Out Cable, S-Video Extended Cable, Composite (RCA) Extended cable,
DVI-I to VGA Adapter, WinProducer 3 Video Editing software
For more information on ABIT and other ABIT Engineered products, click here:
http://www.abit-usa.com
About ABIT
ABIT Computer Corporation designs and sells a complete family of award-winning
mainboards and multimedia products that support industry-leading technology and
provide leading quality and performance for system integration of computer
components supporting a broad range of PC applications, such as e-commerce,
e-business, entertainment and education. Corporate headquarters are located in
Taiwan.
For more information, visit the Company's web site at
http://www.abit-usa.com |
