1. Separate BIOS for IS7-G and IS7/IS7-E
2. Add CPU micro code
3. BIOS compiled date: 03/30/2005

1. Updated CPU micro code.
2. Added adjustable MAX & MIN multiplier item for certain retail INTEL CPUs.
3. Supports certain SATA CDROM when "OnChip Serial ATA" is running in "Enhanced Mode".
4. Changed "PWM Shutdown Temperature" as "Disabled", "PWM Warning Temperature" default to 95 degree C.
5. BIOS compile date: 11/23/2004

1. Updated CPU micro code.
2. BIOS compile date: 08/16/2004

1. Updated CPU Micro Code.
2. Shows MAC Address of onboard LAN chip in System Configuration section if "Onboard Network Controller" is disabled.
3. Added AWDFLASH v8.32 support for the "ALT+F2" hot key function.
4. Enhanced compatibility with certain power supplies.
5. Fixed an issue where the "OnChip SATA Raid Rom" item could not be disabled.
6. Calibrated CPU temperature.
7. Added "PWM Shutdown Temperature" item.
8. Added "PWM Warning Temperature" item.
9. BIOS compile date: 04/27/2004

1. Fixed the "CPU is unworkable" error message for P4 Prescott 2.4G (533MHz/ 1M L2/ 90nm) CPUs. Please follow the steps below to update the BIOS:
   1. Press <F1> key to continue booting when the "CPU is unworkable" error message shows on screen.
   2. Boot up the system from bootable floppy disk and then update BIOS.
2. BIOS compile date: 03/12/2004.

1. Fixed a problem where the system cannot boot into Windows if
   1. The OS is installed on the SATA hard disk when both SATA and PATA hard disks are present.
   2. The PATA hard disk is removed after the OS installation.
2. Updated Prescott CPU micro code.
3. Changed the default year to 2004.
4. Updated Intel OSB logo.
5. Enhanced compatibility with certain non-RAID cards.
6. Updated INTEL RAID BIOS to version 3.5.0.3003.
7. BIOS compile date: 02/23/2004.

1. Updated CPU micro code.
2. Added Pentium 4 Extreme Edition support.
3. Fixed the problem where the CAS latency can not be set manually when the CPU:DRAM is set to PSB8000/5:4 or PSB800/3:2.
4. Fixed the problem where the hard disk will not be recognized if the OnChip SATA is set to "Combined Mode" then choose "RAID".
5. Fixed the problem where system will reboot when the "Resume by Alarm" is enabled and user pressed power button to shutdown the system during POST.
6. Fixed HDD size detected as 136GB when 200/250/300 GB SATA drives are connected to SATA1 or SATA2 (ICH5 SATA channels).
7. BIOS compile date: 11/04/2003

1. Updated CPU micro code (0F29H/14H).
2. Added hot key wording to enter BIOS setup when full screen logo enabled.
3. Changed the option wording from "OnChip SATA" to "OnChip SATA RAID" for "Bootable Add-in Device".
4. Changed the default setting of "OnBoard IR Port" to "Disabled".
5. Fixed the booting failure problem of Maxtor SATA HDD (Model name: 6Y120M0) in ICH5R RAID 0 status. (for IS7-G and IS7 only)
6. Changed the option wordings of "Boot Device" from "ZIP100" to "ZIP100/250" and from "USB-ZIP" to "USB-ZIP/LS120".
7. Enhanced the system stability when over clocks the CPU FSB over 255 MHz with CPU:DRAM = 1:1 setting. (Over clocking is out of warranty)
8. Revised the wording of memory status from "DDR at Bank" to "DDR at DIMM" in system configuration table.
9. Fixed the problem that specific CD-ROM device could not be correctly detected when there is specific HDD connected onto the same IDE cable.
10. BIOS Compile Date: 8/15/2003.

1. Korrigiert die Problematik, das nach einer Änderung der "Delay IDE Initial" Einstellunge im BIOS Setup im POST keine Reaktion stattfindet.
2. Ändert die Bezeichnung des IEEE1394 Controller in der PCI-Geräten-Auflistung.
3. Korrigiert Systemfehler beim Ausführen von DOS4GW.EXE unter DOS.
4. Fügt automatische Erkennung der CPU-Geschwindigkeit nach dem Löschen der CMOS Daten hinzu.
5. Fügt SATA RAID 1 Funktion für die Intel ICH5R South Bridge hinzu. Der IAA RAID Treiber sollte auf den neuesten Stand (V3.5 oder höher) gebracht werden, um RAID 1 unter Windows XP zu ermöglichen.
   http://downloadfinder.intel.com/scripts-df/download.asp?url=/6363/eng/iaar35_enu.exe&ProductID=961
6. BIOS erstellt am: 14/7/2003.
   

1. Korrigiert Systemfehlfunktionen, die durch unvollständige Löschung der CMOS Daten durch die Verwendung des CCMOS Jumper entstehen können.
2. Zeigt korrekte IRQ des IDE-Kontrollers in PCI Geräte-Liste auf.
3. Korrigiert CPU Thermal Throttling Verhalten bei Minus-Temperaturen; unterstützt korrekte Temperaturauslesung im BIOS auch Minuswerten.
4. Korrigiert die Problematik, dass das System nicht automatisch in den S4-Modus wechseln kann, nachdem unter WindowsXP und Energieoptionen ein Schema ausgewählt wurde.
5. Updated CPU Micro-Kode (CPUID=0F13h, Patch ID=05h ; CPUID=0F12h, Patch ID=02eh)。
6. Korrigiert das Problem, dass "-Bootabled Add-in Device" in der BIOS Option "PCI Slot Device" nicht in Top-Priorität booten kann.
7. BIOS erstellt am: 02/07/2003
   
   

BIOS ID:13

New Fixes/Features
1. Added support for IS7-G, IS7, and IS7-E.
2. Updated CPU micro code (CPU: 0F29H, ID=11H).
3. Added CPU multiplier 8X for engineering sample CPU and maximum CPU frequency 412 MHz.
4. Revised setup menu for OnChip Serial ATA.
5. Fixed on-chip SATA boot issue while another bootable hard drives exist and attached to IDE-1 or IDE-2.
6. Updated memory reference code and ICH5 BIOS spec to v1.2.
7. Fixed PS/2 mouse malfunctioning problem while the USB cable of Media XP attached to mainboard.
8. Fixed DOS 6.22 booting failure from FAT16 partition.
9. Fixed BIOS hang-up problem which is caused by specific CPU cooling fan reporting error RPM to BIOS when CPU FanEQ 60% enabled.
10. Revised the following default settings in BIOS setup page. - Bootable Add-in Device: PCI Slot Device - CPU FanEQ Active Temperature: 70 C - CPU Warning Temperature: 85 C
11. Added 80, 85, and 90 degrees C into "Shutdown Temperature".
12. Enabled "IDE Block Mode" and hided the option.
13. Revised ICH5R RAID BIOS display issue.
14. Revised power-on delay time from 4~5 seconds to 1~2 seconds after AC power lost and resumed.
15. Added description for "Bootable Add-in Device".
16. Fixed the problem that NB fan still reports full speed in PC Health page when "CPU FanEQ Speed Control" is enabled.
17. Added new option "IDE Bus Master".
18. Added description for "Shutdown when CPUFAN Fail".
19. Revised the wording of IDE channels inside the BIOS Setup. IDE Channel 0, 1, 2, and 3 are changed to 1, 2, 3, and 4.
20. Added new option "SATA RAID ROM" to setup both "OnBoard SATA" and "OnChip SATA".
21. Added new option "HDD Change Message" in Advanced BIOS Features and the default setting is "Disabled". If this option is changed to "Enabled",the system will show warning message and prompt for a confirmation whenone or more than one HDD had been added into or removed from the system.
22. Fixed "CPU THRM-Throttling" function.
23. Added new options "Refresh Cycle Time", "Read Delay Adjust (tRD Adj)", and "Command Per Clock (CPC)".
24. Changed the default setting of "Drive A" from "None" to "1.44M" after Load Fail-safe Defaults.
25. Changed the default setting of "OnCip Serial ATA" to "Auto".
26. Added "Game Accelerator" technology.
27. Revised the error reading of fan speed for specific CPU cooling fan when FanEQ 60% enabled.
28. Fixed the slow detection problem when HDD simulation card installed.
29. Fixed the problem that SMARTDRV.EXE malfunction in DOS 6.22 environment.
30. Fixed the problem that Windows 98 bootable floppy disk causes system hang up during loading CD-ROM driver when "OnChip Serial ATA" is set to"Auto" or "Enhanced Mode".
31. Removed the option "Force Update ESCD".
32. BIOS Compile Date: 6/10/2003.

BIOS ID:11

1. First release.
2. BIOS Compile Date: 4/23/2003.