|
|
|
|
| IS7 | | Intel 865PE Chipsatz Pentium 4 Mainboard
SATA RAID, DUAL DDR 400, AGP 8X, USB 2.0
SoftMenuTM Technologie | |
| BIOS | | Falls sie wissen möchten:
- CPU support list
- Wie das BIOS aktualisiert werden kann? Bitte klicken sie hier.
- Bitte laden sie ausser der BIOSdatei auch das Flash Utility, dass zum aktualisieren benötigt wird, herunter.
- Mehr Erleuterungen zu generellen Fragen und Antworten in Bezug auf das BIOS, finden sie hier.
- Sie brauchten nicht unbedingt das BIOS zu aktualisieren, erst wenn das neueste BIOS eine Verbesserung oder Fehlerbeseitigung anbietet.
- Sie brauchten nicht nacheinander mit jedem neueren BIOS zu aktualisieren, aktualisieren sie einfach nur mit dem neustem BIOS, es beinhaltet alle vorherigen Verbesserungen.
| | Bios Issue Date:2005/03/30 | | BIOS ID:24 | |
- Separate BIOS for IS7-G and IS7/IS7-E
- Add CPU micro code
- BIOS compiled date: 03/30/2005
|
| Bios Issue Date:2004/11/23 | | BIOS ID:23 | |
- Updated CPU micro code.
- Added adjustable MAX & MIN multiplier item for certain retail INTEL CPUs.
- Supports certain SATA CDROM when "OnChip Serial ATA" is running in "Enhanced Mode".
- Changed "PWM Shutdown Temperature" as "Disabled", "PWM Warning Temperature" default to 95 degree C.
- BIOS compile date: 11/23/2004
|
| Bios Issue Date:2004/08/16 | | BIOS ID:22 | |
- Updated CPU micro code.
- BIOS compile date: 08/16/2004
|
| Bios Issue Date:2004/04/27 | | BIOS ID:20 | |
- Updated CPU Micro Code.
- Shows MAC Address of onboard LAN chip in System Configuration section if
"Onboard Network Controller" is disabled.
- Added AWDFLASH v8.32 support for the "ALT+F2" hot key function.
- Enhanced compatibility with certain power supplies.
- Fixed an issue where the "OnChip SATA Raid Rom" item could
not be disabled.
- Calibrated CPU temperature.
- Added "PWM Shutdown Temperature" item.
- Added "PWM Warning Temperature" item.
- BIOS compile date: 04/27/2004
|
| Bios Issue Date:2004/03/12 | | BIOS ID:19 | |
- Fixed the "CPU is unworkable" error message for P4 Prescott 2.4G
(533MHz/ 1M L2/ 90nm) CPUs. Please follow the steps below to update the BIOS:
- Press <F1> key to continue booting when the "CPU is unworkable"
error message shows on screen.
- Boot up the system from bootable floppy disk and then update BIOS.
- BIOS compile date: 03/12/2004.
|
| Bios Issue Date:2004/02/23 | | BIOS ID:18 | |
- Fixed a problem where the system cannot boot into Windows if
- The OS is installed on the SATA hard disk when both SATA and PATA hard
disks are present.
- The PATA hard disk is removed after the OS installation.
- Updated Prescott CPU micro code.
- Changed the default year to 2004.
- Updated Intel OSB logo.
- Enhanced compatibility with certain non-RAID cards.
- Updated INTEL RAID BIOS to version 3.5.0.3003.
- BIOS compile date: 02/23/2004.
|
| Bios Issue Date:2003/11/04 | | BIOS ID:17 | |
- Updated CPU micro code.
- Added Pentium 4 Extreme Edition support.
- Fixed the problem where the CAS latency can not be set manually when the
CPU:DRAM is set to PSB8000/5:4 or PSB800/3:2.
- Fixed the problem where the hard disk will not be recognized if the OnChip
SATA is set to "Combined Mode" then choose "RAID".
- Fixed the problem where system will reboot when the "Resume by Alarm" is
enabled and user pressed power button to shutdown the system during POST.
- Fixed HDD size detected as 136GB when 200/250/300 GB SATA drives are connected
to SATA1 or SATA2 (ICH5 SATA channels).
- BIOS compile date: 11/04/2003
|
| Bios Issue Date:2003/08/15 | | BIOS ID:16 | |
- Updated CPU micro code (0F29H/14H).
- Added hot key wording to enter BIOS setup when full screen logo enabled.
- Changed the option wording from "OnChip SATA" to "OnChip
SATA RAID" for "Bootable Add-in Device".
- Changed the default setting of "OnBoard IR Port" to "Disabled".
- Fixed the booting failure problem of Maxtor SATA HDD (Model name: 6Y120M0)
in ICH5R RAID 0 status. (for IS7-G and IS7 only)
- Changed the option wordings of "Boot Device" from "ZIP100"
to "ZIP100/250" and from "USB-ZIP" to "USB-ZIP/LS120".
- Enhanced the system stability when over clocks the CPU FSB over 255 MHz
with CPU:DRAM = 1:1 setting. (Over clocking is out of warranty)
- Revised the wording of memory status from "DDR at Bank" to "DDR
at DIMM" in system configuration table.
- Fixed the problem that specific CD-ROM device could not be correctly detected
when there is specific HDD connected onto the same IDE cable.
- BIOS Compile Date: 8/15/2003.
|
| Bios Issue Date:2003/07/14 | | BIOS ID:15 | |
- Korrigiert die Problematik, das nach einer Änderung der "Delay IDE
Initial" Einstellunge im BIOS Setup im POST keine Reaktion stattfindet.
- Ändert die Bezeichnung des IEEE1394 Controller in der PCI-Geräten-Auflistung.
- Korrigiert Systemfehler beim Ausführen von DOS4GW.EXE unter DOS.
- Fügt automatische Erkennung der CPU-Geschwindigkeit nach dem Löschen der
CMOS Daten hinzu.
- Fügt SATA RAID 1 Funktion für die Intel ICH5R South Bridge hinzu. Der IAA
RAID Treiber sollte auf den neuesten Stand (V3.5 oder höher) gebracht werden,
um RAID 1 unter Windows XP zu ermöglichen.
http://downloadfinder.intel.com/scripts-df/download.asp?url=/6363/eng/iaar35_enu.exe&ProductID=961
- BIOS erstellt am: 14/7/2003.
|
| Bios Issue Date:2003/07/02 | | BIOS ID:14 | |
- Korrigiert Systemfehlfunktionen, die durch unvollständige Löschung der
CMOS Daten durch die Verwendung des CCMOS Jumper entstehen können.
- Zeigt korrekte IRQ des IDE-Kontrollers in PCI Geräte-Liste auf.
- Korrigiert CPU Thermal Throttling Verhalten bei Minus-Temperaturen; unterstützt
korrekte Temperaturauslesung im BIOS auch Minuswerten.
- Korrigiert die Problematik, dass das System nicht automatisch in den S4-Modus
wechseln kann, nachdem unter WindowsXP und Energieoptionen ein Schema ausgewählt
wurde.
- Updated CPU Micro-Kode (CPUID=0F13h, Patch ID=05h ; CPUID=0F12h, Patch
ID=02eh)。
- Korrigiert das Problem, dass "-Bootabled Add-in Device" in der
BIOS Option "PCI Slot Device" nicht in Top-Priorität booten kann.
- BIOS erstellt am: 02/07/2003
|
| Bios Issue Date:2003/06/10 | | BIOS ID:13
New Fixes/Features
- Added support for IS7-G, IS7, and IS7-E.
- Updated CPU micro code (CPU: 0F29H, ID=11H).
- Added CPU multiplier 8X for engineering sample CPU and maximum CPU frequency
412 MHz.
- Revised setup menu for OnChip Serial ATA.
- Fixed on-chip SATA boot issue while another bootable hard drives exist and
attached to IDE-1 or IDE-2.
- Updated memory reference code and ICH5 BIOS spec to v1.2.
- Fixed PS/2 mouse malfunctioning problem while the USB cable of Media XP
attached to mainboard.
- Fixed DOS 6.22 booting failure from FAT16 partition.
- Fixed BIOS hang-up problem which is caused by specific CPU cooling fan reporting
error RPM to BIOS when CPU FanEQ 60% enabled.
- Revised the following default settings in BIOS setup page. - Bootable Add-in
Device: PCI Slot Device - CPU FanEQ Active Temperature: 70 C - CPU Warning
Temperature: 85 C
- Added 80, 85, and 90 degrees C into "Shutdown Temperature".
- Enabled "IDE Block Mode" and hided the option.
- Revised ICH5R RAID BIOS display issue.
- Revised power-on delay time from 4~5 seconds to 1~2 seconds after AC power
lost and resumed.
- Added description for "Bootable Add-in Device".
- Fixed the problem that NB fan still reports full speed in PC Health page
when "CPU FanEQ Speed Control" is enabled.
- Added new option "IDE Bus Master".
- Added description for "Shutdown when CPUFAN Fail".
- Revised the wording of IDE channels inside the BIOS Setup. IDE Channel 0,
1, 2, and 3 are changed to 1, 2, 3, and 4.
- Added new option "SATA RAID ROM" to setup both "OnBoard SATA"
and "OnChip SATA".
- Added new option "HDD Change Message" in Advanced BIOS Features
and the default setting is "Disabled". If this option is changed
to "Enabled",the system will show warning message and prompt for
a confirmation whenone or more than one HDD had been added into or removed
from the system.
- Fixed "CPU THRM-Throttling" function.
- Added new options "Refresh Cycle Time", "Read Delay Adjust
(tRD Adj)", and "Command Per Clock (CPC)".
- Changed the default setting of "Drive A" from "None"
to "1.44M" after Load Fail-safe Defaults.
- Changed the default setting of "OnCip Serial ATA" to "Auto".
- Added "Game Accelerator" technology.
- Revised the error reading of fan speed for specific CPU cooling fan when
FanEQ 60% enabled.
- Fixed the slow detection problem when HDD simulation card installed.
- Fixed the problem that SMARTDRV.EXE malfunction in DOS 6.22 environment.
- Fixed the problem that Windows 98 bootable floppy disk causes system hang
up during loading CD-ROM driver when "OnChip Serial ATA" is set
to"Auto" or "Enhanced Mode".
- Removed the option "Force Update ESCD".
- BIOS Compile Date: 6/10/2003.
|
| Bios Issue Date:2003/04/11 | | BIOS ID:10
- First release
- BIOS Compile Date: 4/11/2003.
|
|
|
|
| | |
|