Universal abit > Motherboard, Digital Speakers, iDome, AirPace, Multimedia

<strong>abit</strong> Home

abit Home | Moederborden | MultiMedia | Accessoires |

| CPU support list

| Downloads

| Verkrijgbaarheid

| Contacteer abit

| Over abit

Onderzoek en ontwikkeling

Copyright informatie

Aanmelding nieuwsbrief

Inschrijven/ Uitschrijven

Zoeken

Produkt
FAQ's
Nieuws
Award

Zoeken

Vraag typeLatest

Totale rijen:358 Pagina:4/18 Naar boven << >> Einde

Common FAQ:

1. How to do CCMOS Action? 2. How to load default for Guru? 3. POST code indication

Datum	Vraag	Hits
2004/10/06	Why doesn't my KV7 / KD7A boot or detect CPU frequency correctly after updating to the latest BIOS?
2002/09/18	Why my system can't auto shutdown even I have set CPU Shutdown Temperature to 60 degree in BIOS? I found Internal CPU Temperature has reached 60 degree in BIOS.
2002/01/30	If I have a mainboard based on a VIA chipset, what special drivers should I install after I install the operating system, and in what order? (VL6)
2002/01/30	If I have a mainboard based on a VIA chipset, what special drivers should I install after I install the operating system, and in what order? [ VH6 ]
2002/03/25	Does ABIT KR7A / KR7A-RAID / KR7A-133 / KR7A-133R / AT7 / KX7 support ECC memory??
2002/01/30	Why my system has an exclamation mark or blue screen of death after sound driver loaded? (KT7-RAID)
2002/12/02	Why there is no DRAM Clock for 200MHz (DDR 400) option in BIOS when using AT7-MAX2 and KD7 series with 333MHz FSB CPUs?
2004/01/16	Why can't the AN7 BIOS correctly detect the CPU default voltage and temperature abnormal alarm, even with "Load Optimized Default" settings? (e.g. AMD Barton 2500+ default 1.65V but 1.844V)
2002/01/30	I have the core voltage set at 1.7V, but PC Health and VHM give me a reading of 1.74V. Why? (KT7-RAID)
2005/08/15	Why system will hang or boot fails after installed the SW IDE Driver when using a dual core CPU under Window XP/2000 ? (AN8, AN8-V, AN8-3rd Eye, AN8 Ultra, AN8 SLI, Fatal1ty AN8, Fatal1ty AN8 SLI, KN8, KN8 Ultra)
2002/07/25	Will any Highpoint 370 BIOS/Driver update for HotRod 100 Card and BE6II v1.2/2.0 boards?
2002/01/04	Why can't I enable the 4X mode in using ATI Radeon Display Cards? (VP6)
2002/03/27	How to install RAM module on NV7-133R?
2004/07/27	Why does my Celeron-D CPU BIOS OSB logo show only as Celeron?(AI7, IC7,IC7-G, IC7-MAX3, IS7, IS7-E, IS7-E2, IS7-M, IS7-V2, IS-10 V2.0, IS-20, SG-72)
2002/01/17	How are the IRQ resources shared on the KA7-100 and KT7-RAID?
2002/01/30	How do I enable 48-bit Logical Block Addressing Support for ATAPI Disk Drives in Windows XP
2002/09/18	Is there any limitation on installing DDR RAM memory on KD7 board?
2002/01/17	Why does my system crash or fail to POST when I try to use 256MB memory modules on Intel 815/815E based motherboards (SL6 /SE6 / SH6 / SA6R)?
2004/03/31	Cool 'n' Quiet How-To
2002/03/27	Could I duplicate a SPDIF (Sony / Philips Digital InterFace) header myself to plug into the NV7m SPDIF pin-out header?

Copyright© 2006 Universal ABIT Co., Ltd. All rights reserved.
Reproduction and distribution in any form without permission is strictly prohibited.
The abit logo is a registered trademark of abit.